Backwards Compatibility – When Worlds Collide

The July 1, 2006 deadline for RoHS implementation in the EU means different things to different companies. Many of the larger OEMs and CMs have been working at selecting materials and developing processes for several years. Within mid-sized companies there is more variation, some have just started, some have not even started figuring that they are exempt or don’t have to worry about the ruling since they don’t believe their products are going to Euorpe (this is equivalent to sticking your head in the sand – RoHS and RoHS legislation is coming to other countries as well).

In either case, companies are now finding that they have to deal with mixed-metal systems. Where we get the most questions is over using Pb-free bumped area array devices with SnPb solder paste and process. Some early work reflowing these devices using SnPb conditions [D. Hillman, et al., “The Impact of Reflowing a Pb free Solder Alloy Using a Tin/Lead Solder Alloy Reflow Profile on Solder Joint Integrity,” International Conference on Lead-free Soldering, CMAP, Toronto, Ontario, Canada, May 24-26, 2005, http://www.CMAP.org] showed failures as early as 200 thermal cycles. In his paper Mr. Hillman showed some great images of solder joint microstructure that varied within the solder joint, it wasn’t homogenous as is common for most solder joints.

Jasbir Bath from Solectron presented some additional reliability data [Jasbir Bath, et al., “Reliability Evaluation of Lead-free SnAgCu PBGA676 Components using Tin-Lead and Lead-free SnAgCu solder paste,” Proceedings of 2005 SMTA International, Chicago, IL, http://www.smta.org]. This paper shows that mixed metal systems, even when reflowed at Pb-free temperatures are not as reliable as Pb-free/Pb-free or SnPb/SnPb systems.

Some recent work by John Pan (San Luis Opispo) and Bath [Pan, et al., “Lead-free Soldering Backward Compatibility”, IPC/JEDEC Pb-free Conference, San Jose, 2006, http://www.ipc.org] calculated the melting point of the mixed metal system. The idea behind this study was to figure out what temperature was needed in order to get complete melting of the solder ball and paste and get complete mixing – without having to go to Pb-free soldering temperatures. For example, a 1.27mm pitch BGA with a bump diameter of 0.028″ printed with a 0.005″ stencil (0.027″ round aperture) melts at 218C whereas a 0.5mm CSP with a bump diameter of 0.010″, printed with a 0.004″ stencil (0.011″ square aperture) melts at 206C.

Bottom line: Mixed SnPb and Pb-free solders is not a good idea. If you have no choice, make sure that you have a high enough temperature at the solder joint to permit complete melting and dissolution in order to get the best reliability. You also need to realize that this “best reliability” is not likely to be as good as “pure” metal systems.

This entry was posted in Sticky Notes by Brian. Bookmark the permalink.

About Brian

Brian J. Toleno, Ph.D. is the Application Engineering Team Leader with Henkel in Irvine, California. He holds a Ph.D. in analytical chemistry from Penn State University and a B.S. in chemistry from Ursinus College. Prior to joining Henkel, Toleno managed the failure analysis laboratory at the Electronics Manufacturing Productivity Facility (EMPF). He is an active member of SMTA, served as the Program Chair for the 2005 IEMT and is active within the IPC, serving as the underfill handbook committee (J-STD-030) chairperson and co-chair of the Solder Paste Standards Committee (J-STD-005). Toleno has written a course on failure analysis for SMTA, has authored numerous publications for trade journals and peer reviewed publications, and written two chapters for electronic engineering handbooks on adhesives and materials.