Missed It by That Much …

Yucky brd C6 Running a DRC (design rule check) before sending your PCB out for fab and assembly is a must. It’s also a minimum. Not everything is caught by all DRCs.

For example, if you look at these PCB images, you’ll undoubtedly spot the problem right away. These passed the Eagle DRC. I’m not saying all CAD packages will miss this kind of thing, but you should always expect that something might get through. Yucky brd I2C

Of course, if you end up selecting the wrong component footprint, or if the footprint library part was created incorrectly, the DRC definitely won’t catch it. A DRC also won’t likely help if you output your Gerbers incorrectly, i.e., positive output vs. negative output.

Just like you don’t completely trust an autorouter, you shouldn’t completely trust your CAD packages ERC and DRCs. Spend a little time manually double-checking things too.

Duane Benson
Bring out the cone of silence

http://blog.screamingcircuits.com/