Packing Parts for Personal Manufacturing

Manufacturing, especially small volume one-time-only builds (like a prototype) is hard. It’s not wise for most people to actively seek out chaos, but that’s what we do, and we do it wisely. That’s what we’ve been doing since 2003.

We do it because it’s hard and because it’s necessary.

A big part of quality manufacturing involves risk reduction. Prototyping and quick-turns inherently add in a lot of risk. While we’ve designed our processes and systems around turning that risk into a quality product, there are a few things that you, the customer, can do to help reduce risk even further.

One of the best things you can do to reduce risk is to prepare a well organized kit, as shown in this video:

You can send us your parts in short, cut strips, like you get from Digikey or Mouser, long continuous strips, full or partial reels, tubes or trays. We machine place from all of those types of packages. What’s important is clear labeling and organization.

Individual, or mixed/loose components are not good, though. Pins get bent, leads get contaminated, values get mixed… Leave them in the strip, even if it’s short. If you’ve got multiple short strips of the same part, we can still machine place. Don’t tape them together. We can deal with them as is.

Duane Benson
Peter Piper Picked a Peck of Pickeled Manufacturing

http://blog.screamingcircuits.com