The name stands for extra small outline no-lead. It’s a newish package from Texas Instruments. In my experience, TI is one of the better companies insofar as testing and documenting manufacturability is concerned. The datasheet for this device is no exception.
The TI part is the five-lead thing above the grain of Jasmine rice, surrounded by a few 01005 ceramic capacitors. I’m selling the capacitors for $500 each. (Just kidding.)
The part is 0.8 x 0.8mm, with the five leads. TI suggests either a 4 mil (0.102mm) trace coming out of the center pad, or a 4 mil via in the pad (the via must be filled and plated at the fabricator ) to escape the center pad. They also do a nice job of detailing out the solder paste stencil layer, as in the following image:
You’ll most likely need a custom CAD footprint for one of these. Either very carefully do it yourself, or go to a solid source like SnapEDA. If they don’t already have it in their library, they’ll make it for you.
These small packages aren’t going away. We’re only going to see more of them. They may seem intimidating, but with a good footprint and a competent manufacturer, they aren’t so bad.
“A ruler of follows”? That makes no sense.
How about ” a rule of followers”?