Back in Person

The Covid-19 vaccine rollout has begun and we can’t wait to get back to seeing old and new friends in person.

To that end, I want to call your attention to the return of PCB East to the Boston area in June.

We will head to Marlboro, MA, for some 55 hours of training across three days (June 15-17) of printed circuit board engineering training. There, SI expert Lee Ritchey will have a couple of tutorials: Printed Circuit Board Stackup Design for High Performance Products, and also Power Delivery System Design.

We also will offer two full days of Rick Hartley, including a brand new talk titled, “PC Board Design for Optimum Fabrication and Assembly.” As Rick notes, Happy Holden has presented at PCB West a few times where he’s explained how fabricators determine pricing for bare boards and how EMS suppliers determine pricing for PCB assemblies. Happy shares what he calls a “Fab and Assembly Report Card,” which is how manufacturers assess and weight the variables that drive cost.

So, for instance, as most readers know, board size is a major cost driver. But, as Rick explains, what most designers don’t know is that aspect ratio of length to width also has a major impact. Two boards with the same number of layers and same number of sq. inches but with a difference in their respective aspect ratios – say one is much longer than wide – will push up the bare board cost. Same with assembly, which has even more cost drivers than does fab. Rick is going to do is discuss these major cost drivers.

Rick also told me that at PCB West he had discussions during the chat sessions with some of the bare board fabricators in attendance. One of them said (I’m paraphrasing here), “At any point in time as many as 90% of our jobs are on-hold, waiting for correction or clarity from the customer, so we can proceed.” In Rick’s opinion, designers are flying blind when it comes to many the cost drivers and what suppliers need at both the bare board and assembly level, hence the reason for so many delayed PCBs. These delays also add cost.

What Rick wants to do is to highlight and talk about the factors that Really drive up cost, like board size and aspect ratio, layer count, Z-axis uniformity, copper balance, etc.

And Susy Webb will have brand new, two-day tutorial for design engineers, “A Comprehensive Guide to PCB Design Necessities.” Her class will feature an overview of the entire process of board design, from start to finish, addressing the EE designing their own boards or the new designer who needs to thoroughly understand all the steps and processes. She’ll cover everything from the electronics and physics involved, how the rise time and controlling the energy fields impact the signals on the board, choosing parts types, schematics and signal and constraint issues, mechanical issues, and so on. Susy is also doing an all-day webinar.

We are looking forward to these any other presentations, and also to the exhibits on Jun. 16. Registration is now open, so visit pcbeast.com for details.

This entry was posted in Hot Wires, Laying It Out and tagged , , , , , , by Mike. Bookmark the permalink.

About Mike

Mike Buetow is president of the Printed Circuit Engineering Association (pcea.net). He previously was editor-in-chief of Circuits Assembly magazine, the leading publication for electronics manufacturing, and PCD&F, the leading publication for printed circuit design and fabrication. He spent 21 years as vice president and editorial director of UP Media Group, for which he oversaw all editorial and production aspects. He has more than 30 years' experience in the electronics industry, including six years at IPC, an electronics trade association, at which he was a technical projects manager and communications director. He has also held editorial positions at SMT Magazine, community newspapers and in book publishing. He is a graduate of the University of Illinois. Follow Mike on Twitter: @mikebuetow