Small component packages seem to be a recurring theme with me. It’s understandable, I guess. Super tiny packages are becoming more and more common and we build a lot of product with them.
The smallest we’ve built is 0.3mm pitch. Those aren’t common enough to be considered standard — they’re still an experimental assembly — but not many chips use them yet. 0.4mm, on the other hand, is something we see on a pretty regular basis.
What’s so tough about that? The biggest challenge with these form-factors seems to be footprint design and escape routing. I can see why. There really isn’t room to follow any of the standard BGA practices. You can’t fit escape vias between the pads and you can’t put vias in the pads, unless they are filled and plated over at the board house. Filled and plated vias are the easiest way to go, but it can make for an expensive board fab.
KL03 WLCSP20 on a US Lincoln penny. One of my side projects involves trying to make the smallest possible motor driver. For this project, I’ve chosen the Allegro A3903 driver. It’s a 3 x 3mm DFN (dual flatpack no leads) with 0.5mm pitch pads and a thermal pad in the middle. The microcontroller will be the new Freescale KL03 32-bit ARM in a 1.6 x 2.0mm WLCSP (wafer level chip scale) package. It also comes in a 3 x 3 x 0.5mm pitch 16 pin QFN. Without an expensive PCB, that may be my only option.
Pick your CAD package. I’m using the newest version (5.1) of Sunstone Circuit’s CAD package, PCB123, but the principles here will apply to any CAD software. If you don’t already have a copy, download PCB123 V5.1 here.
If you’ve got fast Internet, you’re done now, so go ahead and install it. You’ll need the manual too, which you can get here.
I need to eat now, so stay tuned for Part 2.
Nerfvana – It’s like Nerdvana, but with more foam darts.