The Top 10 of 2016 — PCD&F

As we did with CIRCUITS ASSEMBLY, each year we review the 10 most-viewed features.

Keep in mind that the counts are not adjusted by the date of publication. Therefore, an article published in January has an advantage over one published in December. The month of publication is listed in parentheses.

10. “Designing PCBs for DDR Busses,” by Nitin Bhagwath (June 2016)

9. “Ensuring Reliable Products with New Rigid-Flex Design Rules,” by Jim Frey (September 2016)

8. “Empirical Confirmation of Via Temperatures,” by Doug Brooks, Ph.D. (February 2016)

7. “6 Pillars of PCB DfMA Success,” by John McMillan (March 2016)

6. “Insertion Loss Modeling,” by Jeff Loyer (January 2016)

5. “Price vs. Function in Today’s EDA Software,” by Chelsey Drysdale (December 2016)

4. “IPC-1782: The New Dawn of Electronics Traceability,” by Michael Ford (December 2016)

3. “5 Common Mistakes in Board Design,” by Arbel Nissan (December 2016)

2. “DC Analysis of PDN: Essential for the Digital Designer,” by Jeff Loyer (March 2016)

1. “Via-in-Pad Design Considerations for Bottom Terminated Components on PCB Assemblies,” by Matt Kelly, Mark Jeanson and Mitch Ferrill (March 2016)

Thanks, as always, for reading!

The Top 10 of 2016 — Circuits Assembly

Each year we review the 10 most-viewed features of PCD&F and CIRCUITS ASSEMBLY. This year, we’ll start with CA. Keep in mind that the counts are not adjusted by the date of publication. Therefore, an article published in January has an advantage over one published in December. The month of publication is listed in parentheses.

10. “New Embeddable Technologies,” by Chris Reynolds. (January)

9. “Applying Lean Philosophies to Supply Chain Management in EMS,” by Wally Johnson. (February)

8. “GHS: The Final Countdown,” by Scott Mazur. (Note: This isn’t his only entry in this year’s top 10.) (January)

7. “Field Performance of pH neutral Cleaning Agents,” by Umut Tosun, Jigar Patel, Kalyan Nukala and Fernando Gazcon. (September)

6. “Online Bath Monitoring,” by Rebecca Dettloff. (March)

5. “Via-in-Pad Design Considerations for Bottom Terminated Components on PCB Assemblies,” by Matt Kelly, Mark Jeanson and Mitch Ferrill. (February)

4. “How to Use the Right Flux for Selective Soldering Applications,” by Bruno Tolla, Ph.D., Denis Jean and Xiang Wei, Ph.D. (April)

3. “Blurred Lines,” by Mike Buetow, a review of the Top 50 EMS companies from 2015. (April)

2. “Extreme Long-Term PCB Surface Finish Solderability Assessment,” by Gerard O’Brien and David Hillman. (July)

1. And the most-viewed article on CircuitsAssembly.com this year (by 35 views) was  “Energy Reduction in the Electronics Facility” by Scott Mazur. (March)

Thanks to everyone to contributed this year, and thanks especially to all our loyal readers!